Struct TimeReal

pub struct TimeReal(FixedI128<U64>);

Either nanoseconds or sequence numbers.

Must be matched with a crate::TimeType to know what.

Used both for time points and durations.

This is like TimeInt with added precision to be able to represent time between sequences (and even between nanoseconds). This is needed in the time panel to refer to time between sequence numbers, e.g. for panning.

We use 64+64 bit fixed point representation in order to support large numbers (nanos since unix epoch) with sub-integer precision.

Tuple Fields

0: FixedI128<U64>

Implementations

impl TimeReal

pub const MIN: Self = _

pub const MAX: Self = _

pub fn floor(&self) -> TimeInt

pub fn round(&self) -> TimeInt

pub fn ceil(&self) -> TimeInt

pub fn as_f32(&self) -> f32

pub fn as_f64(self) -> f64

pub fn abs(self) -> Self

pub fn from_secs(v: f64) -> Self

pub fn as_secs_f64(self) -> f64

Trait Implementations

impl Add<TimeInt> for TimeReal

type Output = TimeReal

The resulting type after applying the + operator.

fn add(self, rhs: TimeInt) -> Self::Output

Performs the + operation.

impl Add<TimeReal> for TimeInt

type Output = TimeReal

The resulting type after applying the + operator.

fn add(self, rhs: TimeReal) -> Self::Output

Performs the + operation.

impl Add for TimeReal

type Output = TimeReal

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> Self::Output

Performs the + operation.

impl AddAssign for TimeReal

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl Clone for TimeReal

fn clone(&self) -> TimeReal

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TimeReal

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for TimeReal

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl From<Duration> for TimeReal

fn from(duration: Duration) -> Self

Converts to this type from the input type.

impl From<NonMinI64> for TimeReal

fn from(integer: NonMinI64) -> Self

Converts to this type from the input type.

impl From<TimeInt> for TimeReal

fn from(time_int: TimeInt) -> Self

Converts to this type from the input type.

impl From<TimeReal> for Duration

fn from(int: TimeReal) -> Self

Converts to this type from the input type.

impl From<f32> for TimeReal

fn from(value: f32) -> Self

Saturating cast

impl From<f64> for TimeReal

fn from(value: f64) -> Self

Saturating cast

impl From<i64> for TimeReal

fn from(integer: i64) -> Self

Converts to this type from the input type.

impl Hash for TimeReal

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Mul<f64> for TimeReal

type Output = TimeReal

The resulting type after applying the * operator.

fn mul(self, rhs: f64) -> Self::Output

Performs the * operation.

impl Neg for TimeReal

type Output = TimeReal

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl Ord for TimeReal

fn cmp(&self, other: &TimeReal) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq<TimeInt> for TimeReal

fn eq(&self, other: &TimeInt) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<TimeReal> for TimeInt

fn eq(&self, other: &TimeReal) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for TimeReal

fn eq(&self, other: &TimeReal) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<TimeInt> for TimeReal

fn partial_cmp(&self, other: &TimeInt) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<TimeReal> for TimeInt

fn partial_cmp(&self, other: &TimeReal) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for TimeReal

fn partial_cmp(&self, other: &TimeReal) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for TimeReal

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl Sub<TimeInt> for TimeReal

type Output = TimeReal

The resulting type after applying the - operator.

fn sub(self, rhs: TimeInt) -> Self::Output

Performs the - operation.

impl Sub<TimeReal> for TimeInt

type Output = TimeReal

The resulting type after applying the - operator.

fn sub(self, rhs: TimeReal) -> Self::Output

Performs the - operation.

impl Sub for TimeReal

type Output = TimeReal

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation.

impl SubAssign for TimeReal

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl Sum for TimeReal

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Takes an iterator and generates Self from the elements by “summing up” the items.

impl Copy for TimeReal

impl Eq for TimeReal

impl StructuralPartialEq for TimeReal