Struct re_types::components::Radius

#[repr(transparent)]
pub struct Radius(pub Float32);

Component: The radius of something, e.g. a point.

Internally, positive values indicate scene units, whereas negative values are interpreted as UI points.

UI points are independent of zooming in Views, but are sensitive to the application UI scaling. at 100% UI scaling, UI points are equal to pixels The Viewer’s UI scaling defaults to the OS scaling which typically is 100% for full HD screens and 200% for 4k screens.

Tuple Fields

0: Float32

Implementations

impl Radius

pub const ZERO: Self = _

Zero radius.

pub const ONE_UI_POINTS: Self = _

Radius of length 1 in ui points.

impl Radius

pub fn new_scene_units(radius_in_scene_units: f32) -> Self

Creates a new radius in scene units.

Values passed must be finite positive.

pub fn new_ui_points(radius_in_ui_points: f32) -> Self

Creates a new radius in ui points.

Values passed must be finite positive.

pub fn scene_units(&self) -> Option<f32>

If this radius is in scene units, returns the radius in scene units.

pub fn ui_points(&self) -> Option<f32>

If this radius is in ui points, returns the radius in ui points.

Methods from Deref<Target = f32>

pub const RADIX: u32 = 2u32

pub const MANTISSA_DIGITS: u32 = 24u32

pub const DIGITS: u32 = 6u32

pub const EPSILON: f32 = 1.1920929E-7f32

pub const MIN: f32 = -3.40282347E+38f32

pub const MIN_POSITIVE: f32 = 1.17549435E-38f32

pub const MAX: f32 = 3.40282347E+38f32

pub const MIN_EXP: i32 = -125i32

pub const MAX_EXP: i32 = 128i32

pub const MIN_10_EXP: i32 = -37i32

pub const MAX_10_EXP: i32 = 38i32

pub const NAN: f32 = NaN_f32

pub const INFINITY: f32 = +Inf_f32

pub const NEG_INFINITY: f32 = -Inf_f32

pub fn total_cmp(&self, other: &f32) -> Ordering

Return the ordering between self and other.

Unlike the standard partial comparison between floating point numbers, this comparison always produces an ordering in accordance to the totalOrder predicate as defined in the IEEE 754 (2008 revision) floating point standard. The values are ordered in the following sequence:

• negative quiet NaN
• negative signaling NaN
• negative infinity
• negative numbers
• negative subnormal numbers
• negative zero
• positive zero
• positive subnormal numbers
• positive numbers
• positive infinity
• positive signaling NaN
• positive quiet NaN.

The ordering established by this function does not always agree with the PartialOrd and PartialEq implementations of f32. For example, they consider negative and positive zero equal, while total_cmp doesn’t.

The interpretation of the signaling NaN bit follows the definition in the IEEE 754 standard, which may not match the interpretation by some of the older, non-conformant (e.g. MIPS) hardware implementations.

Example

struct GoodBoy {
    name: String,
    weight: f32,
}

let mut bois = vec![
    GoodBoy { name: "Pucci".to_owned(), weight: 0.1 },
    GoodBoy { name: "Woofer".to_owned(), weight: 99.0 },
    GoodBoy { name: "Yapper".to_owned(), weight: 10.0 },
    GoodBoy { name: "Chonk".to_owned(), weight: f32::INFINITY },
    GoodBoy { name: "Abs. Unit".to_owned(), weight: f32::NAN },
    GoodBoy { name: "Floaty".to_owned(), weight: -5.0 },
];

bois.sort_by(|a, b| a.weight.total_cmp(&b.weight));

// `f32::NAN` could be positive or negative, which will affect the sort order.
if f32::NAN.is_sign_negative() {
    assert!(bois.into_iter().map(|b| b.weight)
        .zip([f32::NAN, -5.0, 0.1, 10.0, 99.0, f32::INFINITY].iter())
        .all(|(a, b)| a.to_bits() == b.to_bits()))
} else {
    assert!(bois.into_iter().map(|b| b.weight)
        .zip([-5.0, 0.1, 10.0, 99.0, f32::INFINITY, f32::NAN].iter())
        .all(|(a, b)| a.to_bits() == b.to_bits()))
}

Trait Implementations

impl Borrow<Float32> for Radius

fn borrow(&self) -> &Float32

Immutably borrows from an owned value.

impl Clone for Radius

fn clone(&self) -> Radius

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Radius

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Radius

fn default() -> Self

Returns the “default value” for a type.

impl Deref for Radius

type Target = Float32

The resulting type after dereferencing.

fn deref(&self) -> &Float32

Dereferences the value.

impl DerefMut for Radius

fn deref_mut(&mut self) -> &mut Float32

Mutably dereferences the value.

impl<'a> From<&'a Radius> for Cow<'a, Radius>

fn from(value: &'a Radius) -> Self

Converts to this type from the input type.

impl<'a> From<Radius> for Cow<'a, Radius>

fn from(value: Radius) -> Self

Converts to this type from the input type.

impl<T: Into<Float32>> From<T> for Radius

fn from(v: T) -> Self

Converts to this type from the input type.

impl Loggable for Radius

type Name = ComponentName

fn name() -> Self::Name

The fully-qualified name of this loggable, e.g. rerun.datatypes.Vec2D.

fn arrow_datatype() -> DataType

The underlying [arrow2::datatypes::DataType], excluding datatype extensions.

fn to_arrow_opt<'a>( data: impl IntoIterator<Item = Option<impl Into<Cow<'a, Self>>>> ) -> SerializationResult<Box<dyn Array>>

where Self: Clone + 'a,

Given an iterator of options of owned or reference values to the current Loggable, serializes them into an Arrow array.

fn from_arrow_opt( arrow_data: &dyn Array ) -> DeserializationResult<Vec<Option<Self>>>

where Self: Sized,

Given an Arrow array, deserializes it into a collection of optional Loggables.

fn from_arrow(arrow_data: &dyn Array) -> DeserializationResult<Vec<Self>>

where Self: Sized,

Given an Arrow array, deserializes it into a collection of Loggables.

fn to_arrow<'a>( data: impl IntoIterator<Item = impl Into<Cow<'a, Self>>> ) -> Result<Box<dyn Array>, SerializationError>

where Self: 'a,

Given an iterator of owned or reference values to the current Loggable, serializes them into an Arrow array.

impl PartialEq for Radius

fn eq(&self, other: &Radius) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Radius

fn partial_cmp(&self, other: &Radius) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl SizeBytes for Radius

fn heap_size_bytes(&self) -> u64

Returns the total size of self on the heap, in bytes.

fn is_pod() -> bool

Is Self just plain old data?

fn total_size_bytes(&self) -> u64

Returns the total size of self in bytes, accounting for both stack and heap space.

fn stack_size_bytes(&self) -> u64

Returns the total size of self on the stack, in bytes.

impl Zeroable for Radius

fn zeroed() -> Self

Calls zeroed.

impl Copy for Radius

impl Pod for Radius

impl StructuralPartialEq for Radius