Struct rerun::dataframe::TimeInt

pub struct TimeInt(Option<NonMinI64>);

A 64-bit number describing either nanoseconds, sequence numbers or fully static data.

Must be matched with a crate::TimeType to know what.

Used both for time points and durations.

Tuple Fields

0: Option<NonMinI64>

Implementations

impl TimeInt

pub const STATIC: TimeInt = _

Special value used to represent static data.

It is illegal to create a TimeInt with that value in a temporal context.

SDK users cannot log data at that timestamp explicitly, the only way to do so is to use the timeless APIs.

pub const MIN: TimeInt = _

Value used to represent the minimal temporal value a TimeInt can hold.

This is not i64::MIN, as that is a special value reserved as a marker for static data (see Self::STATIC).

pub const MAX: TimeInt = _

Value used to represent the maximum temporal value a TimeInt can hold.

pub const ZERO: TimeInt = _

pub const ONE: TimeInt = _

pub fn is_static(self) -> bool

pub fn new_temporal(time: i64) -> TimeInt

Creates a new temporal TimeInt.

If time is i64::MIN, this will return TimeInt::MIN.

This can’t return TimeInt::STATIC, ever.

pub fn from_nanos(nanos: NonMinI64) -> TimeInt

For time timelines.

pub fn from_milliseconds(millis: NonMinI64) -> TimeInt

For time timelines.

pub fn from_seconds(seconds: NonMinI64) -> TimeInt

For time timelines.

pub fn from_sequence(sequence: NonMinI64) -> TimeInt

For sequence timelines.

pub const fn as_i64(self) -> i64

Returns i64::MIN for Self::STATIC.

pub const fn as_f64(self) -> f64

Returns f64::MIN for Self::STATIC.

pub fn inc(self) -> TimeInt

Always returns Self::STATIC for Self::STATIC.

pub fn dec(self) -> TimeInt

Always returns Self::STATIC for Self::STATIC.

Trait Implementations

impl Add<TimeInt> for TimeReal

type Output = TimeReal

The resulting type after applying the + operator.

fn add(self, rhs: TimeInt) -> <TimeReal as Add<TimeInt>>::Output

Performs the + operation.

impl Add<TimeReal> for TimeInt

type Output = TimeReal

The resulting type after applying the + operator.

fn add(self, rhs: TimeReal) -> <TimeInt as Add<TimeReal>>::Output

Performs the + operation.

impl Add for TimeInt

type Output = TimeInt

The resulting type after applying the + operator.

fn add(self, rhs: TimeInt) -> <TimeInt as Add>::Output

Performs the + operation.

impl Clone for TimeInt

fn clone(&self) -> TimeInt

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TimeInt

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for TimeInt

fn deserialize<__D>( __deserializer: __D ) -> Result<TimeInt, <__D as Deserializer<'de>>::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl From<NonMinI64> for TimeInt

fn from(seq: NonMinI64) -> TimeInt

Converts to this type from the input type.

impl From<TimeInt> for Duration

fn from(int: TimeInt) -> Duration

Converts to this type from the input type.

impl From<TimeInt> for Time

fn from(int: TimeInt) -> Time

Converts to this type from the input type.

impl From<TimeInt> for TimeInt

fn from(time: TimeInt) -> TimeInt

Converts to this type from the input type.

impl From<TimeInt> for TimeInt

fn from(time: TimeInt) -> TimeInt

Converts to this type from the input type.

impl From<TimeInt> for TimeInt

fn from(value: TimeInt) -> TimeInt

Converts to this type from the input type.

impl From<TimeInt> for TimeReal

fn from(time_int: TimeInt) -> TimeReal

Converts to this type from the input type.

impl Hash for TimeInt

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for TimeInt

fn cmp(&self, other: &TimeInt) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<TimeInt> for TimeReal

fn eq(&self, other: &TimeInt) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<TimeReal> for TimeInt

fn eq(&self, other: &TimeReal) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for TimeInt

fn eq(&self, other: &TimeInt) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<TimeInt> for TimeReal

fn partial_cmp(&self, other: &TimeInt) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<TimeReal> for TimeInt

fn partial_cmp(&self, other: &TimeReal) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for TimeInt

fn partial_cmp(&self, other: &TimeInt) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for TimeInt

fn serialize<__S>( &self, __serializer: __S ) -> Result<<__S as Serializer>::Ok, <__S as Serializer>::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl SizeBytes for TimeInt

fn heap_size_bytes(&self) -> u64

Returns the total size of self on the heap, in bytes.

fn total_size_bytes(&self) -> u64

Returns the total size of self in bytes, accounting for both stack and heap space.

fn stack_size_bytes(&self) -> u64

Returns the total size of self on the stack, in bytes.

fn is_pod() -> bool

Is Self just plain old data?

impl Sub<TimeInt> for TimeReal

type Output = TimeReal

The resulting type after applying the - operator.

fn sub(self, rhs: TimeInt) -> <TimeReal as Sub<TimeInt>>::Output

Performs the - operation.

impl Sub<TimeReal> for TimeInt

type Output = TimeReal

The resulting type after applying the - operator.

fn sub(self, rhs: TimeReal) -> <TimeInt as Sub<TimeReal>>::Output

Performs the - operation.

impl Sub for TimeInt

type Output = TimeInt

The resulting type after applying the - operator.

fn sub(self, rhs: TimeInt) -> <TimeInt as Sub>::Output

Performs the - operation.

impl TryFrom<Time> for TimeInt

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(t: Time) -> Result<TimeInt, <TimeInt as TryFrom<Time>>::Error>

Performs the conversion.

impl TryFrom<i64> for TimeInt

type Error = TryFromIntError

The type returned in the event of a conversion error.

fn try_from(t: i64) -> Result<TimeInt, <TimeInt as TryFrom<i64>>::Error>

Performs the conversion.

impl Copy for TimeInt

impl Eq for TimeInt

impl StructuralPartialEq for TimeInt